Foot Fungus, Wounds & More
Bacterial Ear Infection Cured,
Local Application of Silvergen Colloidal Silver
Date: 10.2009
Contact: Email at44 @ especulador.com

Hello, my name is Manuel Xanthakis and I live in Argentina.

My family and myself have been making colloidal silver for 3 years now.

First I will give the data of the quality of Ionic/Colloidal quality we use and then examples of successful treatments which other friends and ourselves achieved using this.

Our machine is basically an electrolysis machine home made using a 12 volt transformer, a small bubbling machine for fish tanks to still the solution constantly, a multimeter at the 20 Milli Ampere setting to control the amount of silver which leaves the electrode through the following electrochemical formula:

67 x Average Milli Amperes x time , divided by the water volume in cubic centimeters... 67 is a constant number.

Time is the period during which we measure the Milli Amperes, preferably taken as 15 minute interval may be more or less, but it is recommended not much more to get accurate results)

Average Milli Amperes is the reading at the beginning of the period plus the reading at the end of the period divided by 2.

This formula will give you the Parts Per Million extracted from the electrode for the given period of time.

Example: Milli Ampere readings for a 15 minute period may be 0.5 + 0.76 = 0.63 Milli Ampere Average times 67 being the constant times 15 minutes divided by 500 cc distilled water will give an extraction of 1.27 PPM for that given period. You add sequentially the result in PPM for each period until you reach a total of 8 to 12 PPM. As successive periods go by the Milli Ampere readings will increase as the water becomes more conductive due to the silver particles.

We use good quality distilled water, bubble constantly, The process takes as long as needed depending on several variables, like volume of water, temperature, electrode surface, electrode separation. We do not speed it up estimating that the particles will be smaller. We get a clear liquid with no visible sediment or floating particles (not yellow since this color indicates larger particles). Sota provides a generator that limits the amperage to 1 Milli Ampere, being slower, but permitting a small particle constant erosion of the electrode. Upon measuring the Ionic content we get that these batches give about a 70% Ionic and a 30% Colloid mix. Continuing the process to up to 20 PPM yields a 50/50 mix. We use the 10 PPM concentration.

WE DO NOT SPEED THE PROCESS UP BY ADDING ANYTHING, NOT EVEN CS OR HEATING THE WATER, AS WE BELIEVE LARGE PARTICLES OR COLORING OF THE SOLUTION ALSO INDICATING LARGER PARTICLES.WILL RESULT. WE BELIEVE THAT USING LARGER QUANTITIES OF THE 10 PPM CS WILL BE BETTER THAN SMALL QUANTITIES OF A CONCENTRATED PRODUCT WITH POTENTIALLY LARGER PARTICLES, AS LAB TESTS SHOW THAT CS IS EFFECTIVE FROM 2 TO UP TO 10 PPM.

Cases Treated

Myself and My Family

a) 5 years of internal severe bleeding hemorrhoids. Mixture of 10% DMSO (Dimethilsulfoxide) applied with a small 1 oz bubble enema two times after each bowel movement. In one month the bleeding disappeared and has stopped for a year now. Sometimes, not often, there is some bleeding but goes away spontaneously in at most 2 days.

b) Skin peeling in the hands once a year which lasted 4 months and left spontaneously after lots of rubbing with pumice stone. Applied 50% DMSO and 50% CS and it disappears in a week.

c) Fungus between toes in feet. Four or five applications and it disappears, If after months it comes back do again.

d) Colds and sore throat: Gargle with CS 3 times a day and it will go away. If congestion symptoms I use an Electronic Nebulizer so the CS may attack whatever microorganism has infected your lungs. Drink 8 oz per day if it persists only. Drops in the nose. All as developments may warrant. The whole family uses this method, even the children with success.

e) Indigestion, diarrhea I will drink 500 cc spread in 3 ingestions per day and it is over in one or two days at most.

f) Cuts or burns or open wounds keep moist in CS as long as possible

g) Pink Eye or Conjunctivitis use as drops in the eyes. Using small swimming goggles, inundate one eye at a time for as long as comfortable for a 24 hr complete relief or maybe a bit more.

Friends

h) Bleeding of gums, swishing a gulp in the mouth for 5 or 6 minutes every morning will get rid of the condition, plus eliminate bad breath. Unconfirmed it may fight tooth decay and plaque

i) Severe eye infection where the person could not read with either eye, severe pain to the point of not being able to sleep. The person was treated at a very reputable eye clinic to no avail. After a month changed to another clinic, the best reputed in Argentina, and French drugs were imported. All to no avail and worsening conditions. Upon self application of CS at 10PPM with eye inundation and keeping moist with cotton while lying down the infection started to subside within 48 hours, with constant improvement in vision and decreasing pain. In 30 days the eyes were normal again.

Disclaimer: I am not a doctor (engineer with experience in research), I do not participate in the sale of CS nor advise in any aspect anybody selling CS. The information provided is for the use and experimentation of those persons willing to do so.

Silvermedicine may provide to any party soliciting to contact me, my e-mail address and I will answer questions on the technical and use aspect] of CS

Reprinted from:
http://www.silvermedicine.org